Rigol DHO924S User Manual page 35

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
1.888.610.7664
move the cursor (knob 1 and 2), adjust the decode threshold (knob 1) and
decode result display position (knob 2), adjust the vertical scale (knob 1) and
vertical offset (knob 2) of the math/reference waveform. You can click or tap
Flex Knob on the Toolbar at the upper-right of the screen to set priority.
- Automatic: Cursor > Math/Ref/Decode > Intensity (default priority).
- Manual: all non-menu operation items are listed at the lower part of the Flex
Knob menu. You can select one of them as the current item for multipurpose
knob to adjust.
- Menu operation:
When operating on the menu, you can rotate the multipurpose knob 1/2 to
adjust the value in the menu. When you click or tap an input field and then the
/ icon is displayed in the input field, it indicates that you can use
multipurpose knob 1/2 to set the value. The LED indicator of the corresponding
knob is illuminated. At this point, you can rotate the knob to adjust the value or
press the knob to restore the parameter to the default value.
When using the virtual numeric keypad or drop-down list, you can rotate the
knob to navigate through the keypad or drop-down list and press the knob to
select an item.
3. Analyse Key
Press to access the Analyse menu. In this menu, you can access analysis
features including digital voltmeter (DVM), counter, power analysis, waveform
recording, and pass/fail.
4. Measure Key
Press to access the Measure menu. You can select the waveform parameters
in the menu. For details, refer to
5. Cursor Key
Press to enable cursor measurements. The results are displayed in the right-
side "Result" bar. Three cursor modes are available: Manual, Track, and XY; wherein,
the XY mode is available only when the XY function is enabled.
6. Common Tools Keys
www.calcert.com
15
10 20
5 25
0 30
Select the Measurement Item
.
DHO900 User Guide
sales@calcert.com
19