Rigol DHO924S User Manual page 193

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
1.888.610.7664
Set the Modulation Frequency
When the selected modulating waveform is not noise, you can set the modulation
frequency. Click or tap the Mod Freq input field to set the modulation frequency with
the pop-up numeric keypad. You can also use the corresponding multipurpose knob
to set the value. Its range is from 2 mHz to 1 MHz.
To Enable the Modulation Output
Click or tap Modulation on/off switch to enable the modulation function. In the
"Basic waves" setting menu, click or tap the Output on/off switch to enable the
waveform output. The instrument will output the modulated waveform via the rear-
panel [AFG OUT] connector according to the settings.
www.calcert.com
15
10 20
5 25
0 30
DHO914S and DHO924S only)
DHO900 User Guide
sales@calcert.com
177