Lin Decoding; Figure 18.12 Spi Decoding Event Table - Rigol DHO924S User Manual

18.5
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
1.888.610.7664
Line No.

Figure 18.12 SPI Decoding Event Table

TIP
• When you adjust the horizontal time base, the waveform displayed on the screen will also
change, and the total number of lines containing the decoding information in the event
table will also be changed.
• The displayed decoded data information in the bus is related to the value of the
horizontal time base. Reducing the horizontal time base can help you view the detailed
information.
Export
When the oscilloscope is in "STOP" state, you can export the time and its
corresponding decoded data in the event table.
In Decode menu, click or tap Export, then the save setting interface is displayed. You
can export the data to the internal memory or the external USB storage device (only
when detected) in *.csv format. For details, refer to

LIN Decoding

The oscilloscope samples the LIN signal, and judges each data point to be logic "1" or
logic "0" according to the preset threshold level. The LIN decoding is required to
specify the LIN signal protocol version.
In the Decode menu, click or tap the drop-down button of Bus Type to select LIN,
then configure the parameters for LIN decoding.
www.calcert.com
15
10 20
5 25
0 30
Time
MISO Decoded Data
Store and Load
SPI Bus
MISO Error
.
DHO900 User Guide
sales@calcert.com
211