Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
1.888.610.7664
Source Setting
•
Source A
Click or tap the drop-down button of SourceA to select CH1-CH4 or D0-D15. For
details, refer to
Trigger Source
trigger information label at the top of the screen.
Only when you select the channel that has signal inputs as the trigger source,
can you obtain a stable trigger.
•
Edge A
Select the trigger edge type ("Rising" or "Falling") of Source A in Delay trigger in
the EdgeA item.
•
Source B
Click or tap the drop-down button of SourceB to select CH1-CH4 or D0-D15. For
Trigger Source
details, refer to
trigger information label at the top of the screen.
Only when you select the channel that has signal inputs as the trigger source,
can you obtain a stable trigger.
•
Edge B
Select the trigger edge type ("Rising" or "Falling") of Source B in Delay trigger in
the EdgeB item.
Set the Trigger Condition
Set the time limit condition of Delay trigger in the when item.
•
>: triggers when the time difference (∆T) between the specified edges of Source
A and Source B is greater than the preset time lower limit. Click or tap the input
field of Lower to set the delay time lower limit in Delay trigger with the pop-up
numeric keypad. You can also use the corresponding multipurpose knob to set
the value.
•
<: triggers when the time difference (∆T) between the specified edges of Source
A and Source B is smaller than the preset time upper limit. Click or tap the input
field of Upper to set the delay time upper limit in Delay trigger with the pop-up
numeric keypad. You can also use the corresponding multipurpose knob to set
the value.
•
< >: triggers when the time difference (∆T) between the specified edges of
Source A and Source B is greater than the lower limit of the preset time and
www.calcert.com
15
10
20
5
25
0
30
. The selected trigger source is indicated in the
. The selected trigger source is indicated in the
DHO900 User Guide
sales@calcert.com
89