Figure 9.11 Operation Result Display Window - Rigol DHO924S User Manual

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
1.888.610.7664
Label Source Waveform Size

Figure 9.11 Operation Result Display Window

Source
Click or tap the drop-down button of SourceA or SourceB to select analog channels
CH1-CH4 or digital channels D0-D15 (available only when the digital channel probe is
connected). When a source channel is selected, the selected channel automatically
switches to the ON state.
Waveform Size
You can select "Small", "Medium", or "Large" as the the waveform display mode.
Offset
Offset is used to set the vertical offset of the operation result. You can set the vertical
offset in the following ways.
• In Math menu, rotate the corresponding multipurpose knob on the front panel
or click or tap the icon at the right side of the input field of Offset to increase or
decrease the scale value. You can also click or tap the input field to input a
specific value with the displayed numeric keypad.
• Close the menu and then adjust the vertical offset with the drag gesture on the
touch screen. You can also rotate the multipurpose knob 2 on the front panel to
adjust the vertical offset. Please refer to
front-panel multipurpose knobs.
www.calcert.com
15
10 20
5 25
0 30
Front Panel Overview
to configure the
sales@calcert.com
DHO900 User Guide
127