Rigol DHO924S User Manual page 43

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
1.888.610.7664
6. Trigger Label
- Displays the trigger information of the system, including the trigger type,
trigger level, trigger mode, and etc.
- Click or tap the trigger label, then the trigger setting window is displayed. You
can set the parameters for the trigger.
7. Function Toolbar
Provides STOP/RUN, Default, Measure, Flex Knob, Windows, Cursors, Math, XY,
Storage, Counter, DVM, Decode, Record, and Navigate keys.
8. Result Sidebar
Displays the measurement results and statistics of various functions. Click or tap
at the lower-right corner of the screen to open or close the "Result" sidebar.
9. Split-screen Display
If you enable multiple functions, multiple windows can be displayed on the screen
at one time.
10. Notification Area
Displays USB icon, LAN icon, sound icon, and remote control icon. You can click or
tap this area to open the "Utility" menu.
- USB storage device icon: When a USB storage device is detected,
displayed.
- LAN icon: When the LAN interface is successfully connected,
- Sound icon: In the "Utility" menu, click or tap Setup > Beeper to enable or
disable the sound. When on,
displayed. You can simply click or tap the icon to enable or disable the sound.
- Remote control icon: When you use Web Control to control the instrument
remotely, will be displayed.
11. Math Labels
- Displays the on/off states of Math1-Math4.
- Click or tap M1-M4 labels to display the on/off state, operation type, and
vertical scale for Math1-Math4.
12. AFG Label (for DHO914S and DHO924S only)
www.calcert.com
15
10 20
5 25
0 30
will be displayed; when off,
sales@calcert.com
will be
is displayed.
will be
DHO900 User Guide
27