Export And Import Operation - Rigol DHO924S User Manual

16.4
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
1.888.610.7664
increase or decrease the vertical offset value. You can also use the corresponding
multipurpose knob to adjust the offset.
Restore the Reference Waveform
If you have adjusted the vertical scale and offset for the specified reference waveform
of the current channel, to reset the reference waveform to the position where the
source channel stays prior to the SaveToRef operation, click or tap Reset.
Set the Reference Waveform Color
This series oscilloscope provides five colors (gray, green, light blue, red, and orange)
to mark the reference waveforms of different channels in order to distinguish them.
Click or tap the drop-down button of Color to select the color of the reference
waveform of the channel.
Set the Reference Waveform Label
Click or tap the Label on/off switch to enable or disable the label display of the
specified reference waveform.
Click or tap the input field of Label to set the label of the specified reference channel
with the pop-up numeric keypad.

Export and Import Operation

Export to Internal or External Memory
You can save the current reference waveform to the internal memory or external USB
storage device. The file format of the reference waveform is "*.ref", "*.bin", or "*.csv".
Click or tap Export to enter the reference waveform file saving interface.
• Set the Format
In the file saving interface, click or tap the drop-down button of Format to select
"*.ref", "*.bin", or "*.csv" as the saving format.
• Set the Filename
Click or tap the input field of File Name to set the filename with the pop-up
virtual keypad.
For how to use the keypad, refer to descriptions in
• Set the Save Path
Click or tap the File Path input field, then the disk management menu is
displayed. Through the disk management menu, you can save the current
www.calcert.com
15
10 20
5 25
0 30
Parameter Setting Method
DHO900 User Guide
sales@calcert.com
.
187