Table 3. FSWPH_nn_CFG Pin Strapping Look-Up Table to Set the LTM4683's Switching Frequency and Channel Phase-Interleaving
Angle (Not Applicable if MFR_CONFIG_ALL[6] = 1b), nn = 01 or 23 Channels, Set Top Resistor to 14.3k.
R
*
SWITCHING
FSWPH_CFG
(kΩ)
FREQUENCY (kHz)
NVM; LTM4683
Open
Default = 425
32.4
22.6
18.0
15.4
12.7
10.7
7.68
6.34
5.23
4.22
3.24
2.43
1.65
0.787
0
*R
value indicated is nominal. Select R
FSWPH_nn_CFG
in the table. Consider resistor initial tolerance, T.C.R. and resistor operating temperatures, soldering heat/IR reflow, and endurance of the resistor over
its lifetime. Thermal shock/cycling, moisture (humidity) and other effects (depending on one's specific application) could also affect R
value over time. All such effects must be considered in order for resistor pin-strapping to yield the expected result at every SV
execution of MFR_RESET or RESTORE_USER_ALL, over the lifetime of one's product.
**External setting corresponds to FREQUENCY_SWITCH (Register 0x33) value set to 0x0000; the device synchronizes its switching frequency to that of
the clock provided on the SYNC_nn pin, provided MFR_CONFIG_ALL[4] = 1b. R
Example:
V
DD25
36
θSYNC TO θ0,2
NVM; LTM4683
Default = 0°
250
0°
350
0°
425
0°
575
0°
650
0°
750
0°
500
120°
500
90°
External**
0°
External**
0°
External**
60°
External**
120°
External**
90°
External**
0°
External**
120°
from a resistor vendor such that its value is always within 3% of the value indicated