Bias Current Interface
Specifications when Measuring with the 42841A
Specifications when Measuring with the 42841A
Table D-1
connected.
The measurement accuracy (typical) when connecting the E4980A to the
42841A is the same as that when connecting the 4284A to the 42841A,
described in the Specifications of the 42841A manual. When test frequency
exceeds 1 MHz (the highest value in the 42841A manual), we assume an
accuracy that is double the accuracy at 1 MHz test frequency.
Table D-1
DC bias signal current level
Range
Resolution
Keysight E4980A/AL User's Guide
shows the DC bias signal current level when the 42841A is
E4980A only
Connected with
42841A
E4980A only
Connected with
42841A
-100 mA to 100 mA
0 A to 20 A (connect 42841A x 1 unit)
0 A to 40 A (connect 42841A x 2 units)
1 A (0 A to 50 mA)
10 A (50 mA to 100 mA)
10 mA (0 A to 1 A)
100 mA (1 A to 20 A)
(connect 42841A x 1 unit)
20 mA (0 A to 2 A)
200 mA (2 A to 40 A)
(connect 42841A x 2 units)
-459