Rear Panel: Names And Functions Of Parts; Gpib Interface Connector; Interface Connector - Keysight E4980AL User Manual

Overview

Rear Panel: Names and Functions of Parts

Rear Panel: Names and Functions of Parts
This section describes the names and functions of the parts on the
E4980A/AL's rear panel.
Figure 2-2 Rear panel

1. GPIB Interface Connector

General Purpose Interface Bus (GPIB). The connection of an external controller
and other devices through this connector allows you to configure an automatic
measurement system.

2. Interface Connector

If interface options are installed, the interface connectors will be installed as
shown. If the E4980A/AL is not equipped with an interface option, blank panels
will cover this portion.
Interfaces with which the E4980A/AL can be equipped as options are shown
below.
Handler interface (Option E4980A/AL-201)
This interface is for data exchange with an automatic machine (handler) used
on a production line.
Connector type: 36-pin Centronics
Keysight E4980A/AL Precision LCR Meter 37