Table of Contents
Advertisement
Display Format
BIN NO. DISPLAY Page
BIN NO. DISPLAY Page
When you press the [Display Format] key and BIN No. soft key, the BIN No.
DISPLAY page appears. The bin sorting results are displayed in large
characters while the measurement results are shown in normal characters. The
following measurement controls can be set from the BIN No. DISPLAY page
(The field in parenthesis is used when this control is set).
•
This page also provides the following information in the monitor areas (each
monitor area looks like a field but is not). These conditions can be set from the
MEAS SETUP page and the CORRECTION page, and most conditions can be
set from the MEAS DISPLAY page.
•
•
•
•
•
•
•
Figure 3-9
field on this page.
76
Comparator function ON/OFF (COMP field)
Measurement Function (FUNC)
Impedance range (RANGE)
Test Frequency (FREQ)
Test Signal Level (LEVEL)
DC Bias (BIAS)
Measurement Time Mode (MEAS TIME)
Correction Information (CORR)
shows the available fields and the softkeys that correspond to each
Keysight E4980A/AL Precision LCR Meter
Advertisement
Table of Contents
