Overview of Remote Control
GPIB remote control system
GPIB remote control system
What is GPIB?
GPIB (General Purpose Interface Bus) is an interface standard for connecting
computers and peripherals that supports the following international standards:
IEEE 488.1, IEC-625, IEEE 488.2, and JIS-C1901. The GPIB interface allows
you to control the Keysight E4980A/AL from an external computer. The
computer sends commands and instructions to the E4980A/AL and receives
data sent from the E4980A/AL via the GPIB.
System configuration
Use GPIB cables to make connections between the E4980A/AL, the external
controller (computer), and peripherals.
GPIB remote control system's configuration.
Figure 8-1
Configuration of the GPIB remote control system
226
Figure 8-1
shows an overview of the
Keysight E4980A/AL Precision LCR Meter