Status:operation:enable; Status:operation[:Event]; System:beeper[:Immediate]; System:beeper:state - Keysight E4980AL User Manual

SCPI Command Reference
E4980A/AL commands

:STATus:OPERation:ENABle

Syntax
:STATus:OPERation:ENABle <numeric>
:STATus:OPERation:ENABle?
Description Sets the value of the Operation Status Enable register.
Parameter
Range
Preset value
Equivalent key No equivalent key is available on the front panel.

:STATus:OPERation[:EVENt]

Syntax :STATus:OPERation[:EVENt]
Description Returns the value of the Operation Status Event register. (Query Only)
Equivalent key
No equivalent key is available on the front panel.

:SYSTem:BEEPer[:IMMediate]

Syntax :SYSTem:BEEPer[:IMMediate]
Description Produces a beep sound. Even if the beep sound is disabled by the

:SYSTem:BEEPer:STATe

Equivalent key No equivalent key is available on the front panel.
:SYSTem:BEEPer:STATe
Syntax :SYSTem:BEEPer:STATe {ON|OFF|1|0}
:SYSTem:BEEPer:STATe?
Description Enables a beep sound.
Parameter
ON or 1
Keysight E4980A/AL Precision LCR Meter
<Numeric>
-32,768 to 32,767
0
command, a beep sound is still produced. (No Query)
Description
Enables a beep sound
369