2 Laser Controls, Connectors, and Indicators
Laser Rear Panel
Figure 3
Figure 3. 5519A/B Rear Panel Features
1
2
3
4
5
20
shows the rear panel features.
1
2
Power Connector connects to the AC power input.
Power Switc h activates the 5519A/B Lase Head when set to the 'I'
position, and begins the warm-up sequence that enables laser emission.
Port for Keysight 10882B Laser Cable, which connects the laser to the
E1735A USB Axis Module of the Keysight 5530 Laser Calibrator System.
Laser On (amber)
This LED indicator alerts the operator when the 5519A/B Laser Head is
capable of emitting a laser beam.
Ready (green)
This LED indicator blinks on and off to indicate that the laser is in the process
of warming up, beginning about halfway through the laser warm-up period.
It glows steadily when the 5519A/B Laser Head is ready for use. Warm-up
typically takes about 10 minutes.
MADE IN U.S.A. OF DOMESTIC
AND FOREIGN COMPONENTS
MSIP-REM-ATi-
455530
Keysight 5519A and 5519B User's Guide
5
4
3