Rear Panel Labels - Keysight X Series Installation Notes

Upgrade Instructions

Rear Panel Labels

If the instrument that was upgraded does not have Option ST1 or ST2 the rear panel will have been
changed during the upgrade process and will need to have two rear panel labels attached to it.
These would be the following:
1. Serial Number Label
2. KCC Certification Label
Serial Number Label
If the rear panel was changed during this upgrade, the serial number label will need to be carefully
transferred from the original rear panel to the new one. The serial number label needs to be
attached in the area outlined in Figure 24.
KCC Certification Label
The new KCC certification label provided with this upgrade needs to be affixed to the new rear
panel in the area outlined in Figure 24
Figure 24 Rear Panel Label Locations
Installation Note N9042-90012 31