User And Remote Interface Security Measures; Scpi/Gpib Control Of Interfaces; Operating System Security Features - Keysight X Series Security Features And Document Of Volatility

9

User and Remote Interface Security Measures

This chapter discusses options that are available to you to control and
configure remote access to the instrument, including:
—
—
—
IMPORTANT
Users are responsible for providing security for the I/O ports for remote
access, by controlling physical access to the I/O ports. The I/O ports must be
controlled because they provide access to most user settings, user states,
and the display memory.

SCPI/GPIB Control of Interfaces

The GPIB command
operation of the instrument's front-panel keys and softkey menus.
However, sending the
via its USB ports. For details of how to restrict the operation of the USB ports,
see

Operating System Security Features

The instrument's Windows operating system includes a variety of features that
you can invoke or modify to enhance system security. These include the
following:
— The ability to create custom user accounts, and assign different security
— To provide additional protection for instruments that have a network (or
SCPI/GPIB Control of Interfaces
Operating System Security Features
USB Interfaces. This topic includes information about how to set the
instrument's USB ports to read-only.
(local lockout) can be sent by the controller to disable
LLO
LLO
"Configuring USB for Read-only" on page 64
levels to each account by adding it to an existing group. The group types
predefined by Windows are: Administrator, Power User, User, Backup
Operator, and Guest, but you can also define new group types.
internet) connection, the standard Windows Firewall is enabled by default.
Security Features and Document of Volatility
User and Remote Interface Security Measures
command does not disable access to the instrument
below.
59