Figure 1-5 Typical Gpib Remote Interface - Keysight EPM Series Installation Manual

1 Getting Started
Figure 1-5
2 Use the arrow keys to highlight GPIB Address entry field.
3 Press
4 Press the Enter key
To change the address remotely.
You can set/query the GPIB address remotely using the following command
SYSTem:COMMunicate:GPIB:ADDRess.
48
Typical GPIB Remote Interface
and use the numeric keys to enter the GPIB address in the Pop-up.
Keysight N1913/1914A Installation Guide