Epson G Series Maintenance Manual page 305

Hide thumbs Also See for G Series:

Table of Contents

(7) Connect the connectors.

(8) Re-bundle the cables in their original positions with a wire tie removed in step (5).

(9) Install the arm top cover and the arm bottom cover.

(10) Perform the calibration of Joint #4.

G series Maintenance Rev.3

X241, X41, X42, and X64. (X42:G6-**3** only)

Do not allow unnecessary strain on the cables.

For details, refer to 3. Covers.

For details on the calibration method, refer to 13. Calibration.

G6 Maintenance 8. Joint #4