Connector Plate - Epson G Series Maintenance Manual

G1 Maintenance 3. Covers

3.2 Connector Plate

■ Do not remove the connector plate forcibly.
forcibly may result in damage to the cables, disconnection, and/or contact failure.
Damaged cables, disconnection, or contact failure is extremely hazardous and
may result in electric shock and/or improper function of the robot system.
■ When installing the connector plate, be careful not to allow the cables to interfere
with the plate mounting and do not bend these cables forcibly to push them into
the cover.
CAUTION Unnecessary strain on cables may result in damage to the cables, disconnection,
and/or contact failure.
extremely hazardous and may result in electric shock and/or improper function of
the robot system.
When routing the cables, observe the cable locations after removing the connector
plate. Be sure to place the cables back to their original locations.
Unscrew the connector plate mounting bolts and
remove the plate.
18
Damaged cables, disconnection, or contact failure is
Removing the connector plate
4-M4×12
G series Maintenance Rev.3