Base Bottom Cover - Epson G Series Maintenance Manual

G10 G20 Maintenance 3. Covers

3.8 Base Bottom Cover

The base bottom cover is removed only when replacing the gasket unit.
Unscrew the base bottom cover mounting bolts and remove the cover.
G10/G20-***C* (Cleanroom-model)
Table Top
mounting
Ceiling
mounting
A gasket is installed to G10/G20-***D*, P* (Protected-model).
NOTE

A base bottom cover is not installed to G10/G20-***S* (Standard-model).
366
8-M3×8
8-M3×8
G10/G20-***D*, P* (Protected-model)
G series Maintenance Rev.3
Gasket
8-M3×8
8-M3×8
Gasket