Console Mode - ICP DAS USA ET-6000 Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Chapter 9 Console Mode

Console Mode

Communication with the ET-6000 can be performed via either the Ethernet or COM1 using
Hyper-terminal, Telnet or the 7188xw utility, etc.
Console Commands
Valid commands in console mode are as follows:
1. Help
2. Reset
3. Default
4. Setip/Ip
5. setmask/mask
6. setgateway/gateway
7. seteid/mac
8. com1
9. commode
10. web
All commands are NOT case sensitive.
1. Help
Use the Help command to access information related to the console commands.
If you enter the 'help' command without any parameters, the console will display all
valid commands on the screen. Such as:
ET-6K>help
?,help [command]: Help
reset
default
ip,setip
mask,setmask
gateway,setgateway
mac,seteid
com1 [baudrate][databit][parity][stopbit]
.....
To access help for a specific command, enter help <command name>. Such as:
ET-6K>help ip
ip(MyIP) ip1.ip2.ip3.ip4
2. Reset
ET-6000 User's Manual, 2007, Sep., V1.1,
6PH-002-11----------135