ICP DAS USA ET-6000 Series User Manual page 60

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
Chapter 2 Configuring the ET-6000


Step 4: Follow each step of the instructions provided in the "Configuration Wizard" dialog
box until the following window appears.
Step 4.1: Click the "Custom" button to enter initial operation.
Step 4.2: Click the "Open" button in the COM status section to establish a connection to
the PC.
4.2
Step 4.3: Check that a valid IP, Mask and Gateway value has been inserted into the
"7188E/8000E Settings (Recommended)" fields.
Step 4.4: Click the "Write recommend settings to 7188E/800E" button to confirm the new
settings. Click "YES" in the following dialog
ET-6000 User's Manual, 2007, Sep., V1.1,
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
4.1
6PH-002-11----------58