Table of Contents
Advertisement
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Chapter 1 Introduction
Ethernet cable wiring
Connecting the ET-6000 to Switch or Hub
Connecting the ET-6000 to a Host PC
As a result of the automatic MDI / MDI-X crossover for plug-and-play on the ET-6000 RJ45 port, there is no
need to a crossover cable to connect the ET-6000 to the Host PC, and only a general straight-through cable
is needed to make the connection. The straight-through cable is shown as follows:
6PH-002-11----------41
ET-6000 User's Manual, 2007, Sep., V1.1,
Advertisement
Table of Contents
