Smmi - ICP DAS USA ET-6000 Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
Chapter 1 Introduction


1.4.2

SMMI

All types of ET-6000D series module have the same SMMI format (7-Segment LED
Display, 4 LED Indicators and 4 Push Buttons).
7-Segment LED Display
This display is consists of five 7-Segment LEDs. The most important information related
to the ET-6000D series can be classified as follows:
Group-ID 11111: Indicates the IP information and DHCP status of the ET-6000D module.
Group-IP 22222: Indicates the Baud Rate of the ET-6000D module COM port.
Group-IP 33333: Indicates the Data format and operation mode of the ET-6000D
module COM port
Group-IP 44444: Indicates the number of clients connected to the ET-6000D module.
1. The format of the IP-information is as follows:
5-digit LED Group-ID:111111
LED-1: Indicator, which can be either 1,2,3,4, or 5
LED-2~LED-5: the IP address, which can be 0~9.
A "1." shown on LED-1 denotes the first number of the IP address.
A "2." shown on LED-1 denotes the second number of the IP address.
A "3." shown on LED-1 denotes the third number of the IP address.
A "4." shown on LED-1 denotes the fourth number of the IP address.
A "5." shown on LED-1 denotes the DHCP status.
Eg. "5.___0", 0 (Disabled) and "5.____1", 1(Enabled)
The LED will initially show the Group-ID, and then show the IP address as indicated in
the diagram below. If the IP address is changed, the value displayed will change
immediately.
The default shipping IP = 192.168.255.1.
The LED-display sequence is shown in the diagram below.
ET-6000 User's Manual, 2007, Sep., V1.1,
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
7-Segment
LED Display
4 LED
4 Push Buttons
6PH-002-11----------30