Jumper For Firmware Update; Update Firmware Mode - ICP DAS USA IR-310-RM User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

Jumper for Firmware Update

2.6
There is a jumper JP5 in the case of IR-310-RM for setting the operation mode (OP) or
Firmware update mode (FW).
Figure 2-12: JP5 setting for Firmware Update

2.6.1 Update firmware mode

Set the JP5 to "FW" position and power cycle the IR-310-RM to enable the firmware
update mode. At the same time the power LED blinks rapidly 4 times per second. In
the FW mode, you have to use RS-232 port to update firmware by the Firmware
Update Tool. Please click the menu of IR-310-RM utility [Tool] -> [Firmware Update
Tool] to launch the firmware update tool. According to the following steps, you can
finish the update firmware procedures in the Fig. 2-13.
(1) Select "COM" and "COM Port"
(2) Click "Browser" to select the firmware file (ir310rm_v#_#_#.fw).
(3) Click "Firmware Update" to start the update procedure.
1
2
3
Fig. 2-13: Update firmware Tool for IR-310-RM
IR-310-RM, IR Controlled 10-ch High Power Relay Module (Ver. 1.1, Jul/02/2013) 14