Table of Contents
Advertisement
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
Chapter 3 Web Configuration Page
3.2.2
Serial port settings
The right hand column shows the current serial port settings.
The left hand column shows the serial port settings parameters that can be modified. The
serial port settings page allows you to view and change the Serial port settings of the ET-6000
module.
COM port:
The ET-6000 series only has one COM port (COM1)
Baud Rate:
The Baud Rate can be set to either 300, 600, 1200, 2400, 4800, 9600, 19200,
38400, 57600 or 115200 bps
Data bit:
The Data Bit can be set to either 7 or 8 bit.
Parity:
The Parity can be set to None, Even Odd, Mark or Space.
Stop bit:
The Stop Bit can be set to 1 or 2 bit.
Checksum:
This value can be set to either enabled or disabled.
Operation
Mode:
Mode 0: VxComm (Virtual COM)
Enable VxComm. The Remote application program can use a Virtual COM port (the
VxComm Driver sould be installed) or can connect to TCP/IP Port 10001 to access
the COM port via the Ethernet. In VxComm mode, the COM port can connect to any
serial device. (Unavailable)
ET-6000 User's Manual, 2007, Sep., V1.1,
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
6PH-002-11----------77
Advertisement
Table of Contents
