ICP DAS USA ET-6000 Series User Manual page 42

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
Chapter 1 Introduction


Step 3: Check that the 5-digit 7-SEG LED continuously shows the group ID
information from 11111 to 44444. (If the Module is an ET-6000 series module
without a 7-SEG LED Display, ignore this step)
Step 4: Check that the "RUN" LED on the ET-6000 is periodically ON for 0.5 seconds
and then OFF for 0.5 seconds.
Note:
Only display versions of the module will include a 5-digit 7-SEG LED Display. A detailed
description of the 7-SEG LED Display can be found in Sec. 1.4.2.
ET-6000 User's Manual, 2007, Sep., V1.1,
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
6PH-002-11----------40