Load Factory Default; Web; Smmi - ICP DAS USA ET-6000 Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
Chapter 2 Configuring the ET-6000


2.3

Load Factory Default

2.3.1
Web page configuration
Refer to "Load All Setup Default" in Sec 3.2.3 Basic Setting for more details regarding
loading the factory default using the Web configuration.
2.3.2

SMMI

Accessing the SMMI menu to configure the Factory Default
The LEDs normally show system information. To access the SMMI menu, simultaneously
press the "MODE" and "SET" buttons for at least two seconds. The LED menu has 2
levels. By following the menu tree map shown in Sec. 2.2.2, the cursor position in the
SMMI menu can be changed.
The SMMI menu tree
The SMMI menu is designed to allow users to load the factory default settings, including
I/O, Web Server, and ID settings without requiring a host PC.
The following diagram illustrates the SMMI menu tree.
Menu items that can be changed
There are Six items in the menu, four of which (IO, Net, ID, Web and COM) that can be
changed. When first entering the LED menu, the initial status will be at level 1 and the
cursor position will be at position 1 (IO)
ET-6000 User's Manual, 2007, Sep., V1.1,
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
6PH-002-11----------65