ICP DAS USA ET-6000 Series User Manual page 139

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Chapter 9 Console Mode
Format: commode [mode]
mode:
0 (Vxcomm)
1 (ModbusRTU)
2 (Program)
3 (UPLink)
4 (Debug)
5 (Console)
Refer to Sec. 3.2.2 Serial Port Settings for details of how to change the settings, and
refer to Appendix C: Modbus Protocol for more information.
10. web
This function is used to enable/disable the Web Server on the ET-6000.
Format: web [mode]
mode :
0 (Disable), Disables the Web server.
1 (Enable), Enables the Web server.
If you enter the command above without any other parameters the console will show the
current settings the on screen. Such as
ET-6K>ip
IP=10.0.8.149
ET-6K>mask
Mask=255.255.255.0
ET-6K>gateway
Gateway=10.0.8.254
ET-6K>mac
MAC=0:d:e0:a3:dd:af
ET-6K>
Communication Interface
1. RS232
Set the COM port operation mode to 5. Refer to Sec 3.2.2 Serial port settings
for more details.
ET-6000 User's Manual, 2007, Sep., V1.1,
6PH-002-11----------137