Configuring The Operating Mode - ICP DAS USA LinPAC-51 Series Quick Start Manual

Configuring the Operating Mode

Rotary Switch Position
Normal Mode(Default)
Normal mode is the default operation mode for the LP-51xx. Use this mode to perform
additional tasks and configuration. Programs are also executed in this mode.
Quick Mode
Quick mode is used to bypass the LP-51xx boot screen when booting form a
microSD/microSDHC card, so as to speed up the booting process.
OS Update Mode
This mode is used to update the OS image. Note that the Linux OS image is only suitable
for the LP-51xx. If the LP-51xx cannot be booted or operated in normal mode, use this
mode to update OS image again. Ensure that you backup any important files, before
updating the OS image. For more information, refer to the "LP-51xx OS update manual".
Debug Mode
This mode is only for use by ICP DAS during development of the device.
Reserved
Rotary switch positions 4~9 are reserved by ICP DAS.
ICP DAS
0
1
2
3
Others
LinPAC-51xx Quick Start
Operation Mode
Normal Mode(Default)
Quick Mode
OS Update Mode
Debug Mode
Reserved
Enure the
rotary switch
is in the "0"
position
- 2 -