ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Chapter 2 Configuring the ET-6000
2.2.3
Set the address values
When enter the "Sets the address
values"
sub routine, the first LED is used for choosing
which IPv4 values to change, and the last three LEDs display the current IPv4 values. Use
the "MODE" button to select the cursor position. The "UP" and "DOWN" buttons are used
to input the addresses, and the "SET" button establishes the addresses.
Refer to following figure:
6PH-002-11----------63
ET-6000 User's Manual, 2007, Sep., V1.1,