ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
Chapter 1 Introduction
Four LED Indicators
Name
RUN
MODE
SAFE VALUE
DHCP
Four Push Buttons
Close the Cover
Refer to Section 2.2 for more details regarding how use four SMMI Menu buttons to set
Network configuration. Refer to Section 2.3.2 for more information about setting the
factory defaults for the ET-6000.
You must left the acrylic cover of the ET-6000 before pressing the 4 push buttons.
ET-6000 User's Manual, 2007, Sep., V1.1,
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Table 1-5 Four LED Indicators
LED Action
Flashing
ON/OFF
ON/OFF
ON/OFF
Function
Firmware is running
SMMI mode/Normal mode
Safe value triggered / Un-triggered
DHCP enabled/ DHCP disabled
6PH-002-11----------33
Lift the Cover