Using The " Minios7 Utility - ICP DAS USA ET-6000 Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Chapter 2 Configuring the ET-6000


2.1.1

Using the " MiniOS7 utility"

The MiniOS7 Utility is used to download files to the ET-6000 module and update the OS
image. It can also be used to configure the network and COM port settings. In contrast to
the "Configuration Wizard", valid IP, Mask and Gateway information must be available and
must be manually entered into the text box provided.
Refer to Sec. 1.4.2 for details regarding wiring connections for ET-6000 series modules,
before downloading firmware.
Note:
The Init/Normal switch is always placed in the Normal position.
Step 2: Install the MiniOS7 Utility on the host PC by executing
CD:\NAPDOS\ET7000\Tools\Tools for MiniOS7\MiniOS7_utility\MiniOS7_Utility.exe and
follow the on-screen instructions
Step 3: Run the MinioS7 utility as per the following diagram.
6PH-002-11----------51 
ET-6000 User's Manual, 2007, Sep., V1.1,