Installing The Front Cowling Assembly; Installing The Headlight Beam Adjusting Knob Joints - Yamaha FJR13AG Service Manual

2. Install:
• Center cover assembly "1"
TIP
Fit the projections on the lower center cover into
the holes in the front cowling.
1
EAS31279
INSTALLING THE FRONT COWLING
ASSEMBLY
1. Install:
• Front cowling assembly "1"
TIP
After installing the front cowling assembly, oper-
ate the windshield drive unit and check that the
windshield drive unit arms "a" do not contact the
front cowling when they move up and down.
a
1
EAS31849
INSTALLING THE HEADLIGHT BEAM
ADJUSTING KNOB JOINTS
The following procedure applies to both of the
headlight beam adjusting knob joints.
1. Install:
• Headlight beam adjusting knob joint "1"
TIP
Face the projection "a" on the headlight beam
adjusting knob joint forward.
1
a
4-13
GENERAL CHASSIS (3)
a