Yamaha FJR13AG Service Manual page 33

2. Push the "MENU" switch. The unit setting dis-
play will be shown and "km or mile" will flash
in the display.
Unit
Km or mile
km/L or L/100km
3. Push the "MENU" switch. "km" or "mile" will
flash in the display.
Unit
Km or mile
km/L or L/100km
4. Use the select switch to select "km" or "mile",
and then push the "MENU" switch.
TIP
When "km" is selected, "L/100km" or "km/L" can
be set as the fuel consumption units. To set the
fuel consumption units, proceed as follows. If
"mile" was selected, skip steps 5 and 6.
5. Use the select switch to select "km/L or
L/100km".
6. Push the "MENU" switch, use the select
switch to select "L/100km" or "km/L", and
then push the "MENU" switch again.
7. Use the select switch to highlight " ", and
then push the "MENU" switch to return to the
setting mode menu.
Unit
Km or mile
km/L or L/100km
km
km/L
km
km/L
km
km/L
1-24
Selecting the display items
1. Use the select switch to highlight "Display".
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock
2. Push the "MENU" switch, use the select
switch to highlight the display to change, and
then push the "MENU" switch again.
Display
Display-1
Display-2
Display-3
3. Use the select switch to highlight the item to
change, and then push the "MENU" switch.
Display-1
1-1
A.TEMP
1-2
C.TEMP
1-3
TIME TRIP
4. Use the select switch to select the item to
show, and then push the "MENU" switch.
Display-1
1-1
1-2
C.TEMP
1-3
TIME TRIP
FEATURES
ODO