Yamaha FJR13AG Service Manual page 632

EAS30671
[B-2] DIAGNOSIS USING THE MALFUNCTION HISTORY CODES
Check the malfunction history using the malfunction mode of the Yamaha diagnostic tool.
• Malfunction history is displayed on the Yamaha diagnostic tool. [B-1]
• Malfunction history is not displayed on the Yamaha diagnostic tool. [B-3]
EAS31924
[B-3] MALFUNCTION HISTORY IS NOT DISPLAYED
Use the Yamaha diagnostic tool to check whether automatic deactivation history for the cruise control
system exists.
1. There is automatic deactivation history for the cruise control system.
• Explain the conditions for automatically deactivating the cruise control system to the customer.
• For information about the conditions for automatically deactivating the cruise control system.
Refer to "OUTLINE OF THE CRUISE CONTROL SYSTEM" on page 1-3.
TIP
If you do not have a Yamaha diagnostic tool, the automatic deactivation history cannot be checked.
Therefore, explain the automatic deactivation function of the cruise control system to the customer and
explain that this is not a malfunction.
EAS30674
[C-1] DELETING THE FAULT CODES
1. Delete the fault code using the malfunction of the Yamaha diagnostic tool, and check that the engine
trouble warning light goes off.
EAS30675
[C-2] FINAL CHECK
1. Check the brake lever and brake pedal operation.
2. Check the rear brake light switches.
Refer to "ADJUSTING THE REAR BRAKE LIGHT SWITCH" on page 3-31.
3. Execute the diagnostic mode (code Nos. 82 and 83) to check the operation of the front brake light
switch, rear brake light switch, foot shift sensor, hand shift lever switch, and grip cancel switch.
Refer to "SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE (ECU)" on page 9-5.
4. Execute the diagnostic mode (code Nos. 80 and 81) to check the operation of the cruise control set-
ting switch.
Refer to "SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE (ECU)" on page 9-5.
5. Delete the fault codes.
Refer to "SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE (ECU)" on page 9-5.
6. Check the operation of the cruise control system.
Test ride the vehicle and confirm that the cruise control system is operating normally.
CRUISE CONTROL SYSTEM
8-155