Yamaha FJR13AG Service Manual page 583

Fault code No.
Item
1 Malfunction in charging system. Check the charging system.
2 Delete the fault code and check
that the engine trouble warning
light goes off.
Fault code No. P0601
Fault code No.
Item
Fail-safe system
Diagnostic code No.
Tool display
Procedure
Probable cause of malfunc-
Item
tion and check
1 Malfunction in ECU.
Fault code No. P0606
Fault code No.
Item
Fail-safe system
Diagnostic code No.
Tool display
Procedure
Probable cause of malfunc-
Item
tion and check
1 Malfunction in ECU.
P0560
Charging voltage is abnormal.
Refer to "CHARGING SYSTEM"
on page 8-17.
Defective rectifier/regulator or
AC magneto → Replace.
Defective connection in the
charging system circuit → Prop-
erly connect or replace the wire
harness.
Confirm that the fault code has
a condition of "Recovered" us-
ing the Yamaha diagnostic tool,
and then delete the fault code.
P0601
Faulty ECU memory. (When this malfunction is detected in the ECU,
the fault code number might not appear on the tool display.)
Unable to start engine
Unable to drive vehicle
—
—
—
Maintenance job
Replace the ECU.
Refer to "REPLACING THE
ECU (engine control unit)" on
page 8-250.
P0606
ECU internal malfunction. (When this malfunction is detected in the
ECU, the fault code number might not appear on the tool display.)
Able/Unable to start engine
Able/Unable to drive vehicle
—
—
—
Maintenance job
Replace the ECU.
Refer to "REPLACING THE
ECU (engine control unit)" on
page 8-250.
8-106
FUEL INJECTION SYSTEM
Start the engine and let it idle for
approximately 5 seconds.
Check the condition of the fault
code using the malfunction
mode of the Yamaha diagnostic
tool.
Condition is "Recovered" → Go
to item 2 and finish the service.
Condition is "Detected" → Re-
peat item 1.
Confirmation of service com-
pletion
Turn the main switch to "ON".
Check that the engine trouble
warning light does not come on.
Confirmation of service com-
pletion
Turn the main switch to "ON".
Check that the engine trouble
warning light does not come on.