Yamaha FJR13AG Service Manual page 516

Fault code No.
Item
6 Installed condition of IMU.
7 Malfunction in IMU.
8 Malfunction in CLCU.
CORNERING LIGHT SYSTEM (FJR13ESG)
U0125
Signals cannot be transmitted between the CLCU and the IMU.
Check for looseness or pinch-
ing.
Check the rubber components
for cracks.
Improperly installed IMU → Re-
install or replace the IMU.
Replace the IMU.
Replace the headlight assem-
bly.
8-39
Turn the main switch to "ON",
and then check that the corner-
ing lights come on and go off in
the proper sequence.
Lighting sequence is correct →
Service is finished.
Lighting sequence is not correct
→ Go to item 7.
Turn the main switch to "ON",
and then check that the corner-
ing lights come on and go off in
the proper sequence.
Lighting sequence is correct →
Service is finished.
Lighting sequence is not correct
→ Go to item 8.
Turn the main switch to "ON",
and then check that the corner-
ing lights come on and go off in
the proper sequence.
Lighting sequence is correct →
Service is finished.