Removing The Front Cowling Assembly; Installing The Front Cowling Assembly; Removing The Front Side Cowling - Yamaha N MAX GPD150-A 2015 Service Manual

EAS31278
REMOVING THE FRONT COWLING
ASSEMBLY
1. Remove:
• Front cowling assembly "1"
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Remove the front cowling assembly screws.
b. Pull the front cowling assembly forward to re-
move the projections "a" on the leg shield
from the holes "b" in the front cowling assem-
bly.
b b
b b
1
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
EAS31279
INSTALLING THE FRONT COWLING
ASSEMBLY
1. Install:
• Front cowling assembly "1"
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Fit the projections "a" on the leg shield into
the holes "b" in the front cowling assembly.
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a a
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
b b
1
b. Install the front cowling assembly screws,
and then tighten the screws to specification.
▼▼▼
▲ ▲▲▲ ▲ ▲▲▲ ▲
EAS31696

REMOVING THE FRONT SIDE COWLING

The following procedure applies to both of the
front side cowling.
1. Remove:
• Front side cowling "1"
a a
▲▲▲
▼ ▼▼▼ ▼ ▼▼▼ ▼
a. Removing the front side cowling screws.
b. Remove the projections "a" on the front side
cowling from the holes "b" in the front lower
cowling.
▼▼▼
b
▲ ▲▲▲ ▲ ▲▲▲ ▲
4-21
GENERAL CHASSIS (7)
b b
a a
Front cowling assembly screw
×
(M5 15)
1.8 Nm (0.18 m·kgf, 1.3 ft·lbf)
Front cowling assembly screw
×
(M5 11)
1.8 Nm (0.18 m·kgf, 1.3 ft·lbf)
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
a a
▲ ▲▲▲ ▲ ▲▲▲
▼ ▼▼▼ ▼ ▼▼▼
1
a
▲ ▲▲▲ ▲ ▲▲▲