Yamaha FJR13AG Service Manual page 28

• an odometer display
• tripmeter displays
• a fuel reserve tripmeter display
• an estimated traveling range display
• an elapsed time display
• an ambient temperature display
• a coolant temperature display
• an average fuel consumption display
• an instantaneous fuel consumption display
The items shown in each information display can
be selected.
To set or select the items shown, refer to "Set-
ting mode".
Odometer display:
ODO
The odometer shows the total distance traveled
by the vehicle.
Tripmeter displays:
TRIP-1
TRIP-2
"TRIP-1" and "TRIP-2" show the distance trav-
eled since they were last set to zero.
TIP
• The odometer will lock at 999999 and cannot
be reset.
km
20
km
5.0
km
7.0
1-19
• The tripmeters will reset and continue counting
after 9999.9 is reached.
When approximately 5.5 L (1.45 US gal, 1.21
Imp.gal) of fuel remains in the fuel tank, the last
segment of the fuel meter starts flashing. In ad-
dition, the information display will automatically
change to the fuel reserve tripmeter mode
"TRIP-F" and start counting the distance trav-
eled from that point.
GEAR
4
TRIP-F
In this case, push the select switch to switch the
display in the following order:
TRIP-F → Display–1 → Display–2 → Display–3
→ TRIP-F
To reset a tripmeter, use the select switch to se-
lect the information display that contains the trip-
meter you want to reset. Push the "RESET"
button briefly so that the tripmeter flashes, and
then push the "RESET" button again for 2 sec-
onds while the tripmeter is flashing.
If you do not reset the fuel reserve tripmeter
manually, it will reset automatically after refuel-
ing and traveling 5 km (3 mi).
Estimated traveling range display:
RANGE
The distance that can be traveled with the re-
maining fuel in the fuel tank under the current
riding conditions is shown.
FEATURES
km
3.4
km
11