Create A Diagnostics Diskette; Exiting The Configuration And Diagnostics Menu; Changing Monitor Type Manually; Matrox Mga Millennium Power Desk Utilities - Compaq Deskpro 2000 Series Reference Manual

Create a Diagnostics Diskette

Exiting the Configuration and Diagnostics Menu

Changing Monitor
Type Manually

Matrox MGA Millennium Power Desk Utilities

Create a Diagnostics Diskette allows you to back up the
diagnostics software onto diskette. Compaq strongly
recommends that you make a backup copy of this software as
soon as possible.
This utility is not available in Compaq Diagnostics for Windows;
it must be accessed through the Compaq Utilities menu.
To exit the Compaq Utilities menu, select the Exit option or
press Ctrl+Alt+Delete. Either option restarts the computer and
saves any changes you made.
Plug and Play monitor types are automatically detected, but if
you are not using a Plug and Play monitor, you can manually
select or change the monitor brand, model, refresh rates, color,
and resolution.
Under Windows 3.1 and Windows 95, use the Matrox MGA
Millennium Monitor Selection utility to select a different
monitor. To run Monitor Selection, follow these steps:
1. Select and open Monitor Selection, found in the MGA
Millennium Power Desk, from the Start button in Windows
95 or the Control Panel in Windows 3.1.
2. Click the Monitor Selection button.
3. Select your monitor from among those listed.
4. Click OK to confirm your monitor selection.
5. Test your monitor selection, if desired, by clicking the Test
button.
6. Click Save and Exit to confirm your monitor selection and
close the Monitor Selection dialog box.
7. Select Control Panel, found in the MGA Millennium
Power Desk, to set display settings and preferences.
-9
Reference Guide 3