Removing The Front Bezel - Compaq Evo Workstation w4000 - Convertible Minitower Hardware Reference Manual

Removing the Front Bezel

✎
Hardware Reference Guide
1. If you have locked the Smart Cover Lock, use Computer Setup to
unlock the lock.
2. Shut down the operating system properly, then turn off the
computer and any external devices. Disconnect the power cord
from the power outlet and disconnect any external devices.
Remove the computer access panel.
3. Push up on the two release tabs 1 , then rotate the front bezel
away from the chassis to release it 2 .
Removing the Front Bezel
When replacing the front bezel, ensure that the bottom hinge points
are properly placed in the chassis before rotating the front bezel back
into its original position.
Hardware Upgrades
2–5