Allied Motion Spectrum Controls 2706-P22-SC User Manual page 20

1-14
NOTE
User's Manual 0300277-03 Rev. A
Chapter 1: Installing InView Message Display
Do NOT fasten the top screws to the end caps. The top screws are used to
fasten the ceiling mounting brackets to the end caps in the next step.
3. Attach ceiling mounting brackets to all the end caps and torque the
screws to 2.7 Nm (24 lb-in).
See Step 2 of the Ceiling Mount instructions.
4. Match the signs together back-to-back and connect them together.
See Step 2 of the Ceiling Mount instructions.
Follow Steps 7 through 10 of the Wall Mount instructions.
5. Use chains (not supplied) to hang the signs from the ceiling.