Mounting The 2706-P42C2-Sc And 2706-P44C2-Sc Displays - Allied Motion Spectrum Controls 2706-P22-SC User Manual

Mounting the 2706-P42C2-SC and 2706-P44C2-SC Displays

NOTE
Appendix B: Installing InView Marquee 2706-P4xC2-SC Message Displays B-13
Sign installation must be performed by qualified personnel. Wall mounting
brackets and fasteners are provided with the display. Hardware to fasten the
display to the wall or ceiling is not provided as the appropriate fasteners must be
used for brick, stone, or wood etc.
If you use the equipment in a manner not specified by Spectrum
Controls, Inc., it may impair the protection provided by the equipment.
The factory-applied finish must not be altered or changed.
Mount the sign so that it is easy to disconnect power when servicing.
Always disconnect the communications cable(s) before disconnecting
power.
Modifying the sign housing voids the warranty.
Mounting Displays on a Wall
Wall mount brackets dimensions are as follows:
User's Manual 0300277-03 Rev. A