KidKraft Cedar Summit F25745E Installation And Operating Instructions Manual page 84

Step 44: Install Nest Floor Joists
Part 1
A: Measure 5/8" (15.9mm) down from the top of the (431) SL Insert and place (441) Nest Floor Joist B on the
inside as shown in fig.44.2. Install from the outside using 2 (H11) ¼ x 2-3/4" Hex Bolts (with lock washer, flat
washer and t-nut) and from the inside using 3 (S11) #8 x 2" Wood Screws. (fig.44.1 and 44.2)
Fig. 44.2
1/4" Lock
H11
Washer
5/8"
Wood Parts
1 x Nest Floor Joist B 1-1/2 x 1-1/2 x 29-1/2"
441
1/4" Flat
431
Washer
441
3 x
2 x
Fig. 44.1
H11
S11
1/4" T-Nut
Hardware
#8 x 2" Wood Screw
S11
1/4 x 2-3/4" Hex Bolt
H11
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
84
S11