KidKraft Cedar Summit F25745E Installation And Operating Instructions Manual page 62

Step 26: Large Roof Assembly
Part 2
C: Place 1 Roof Support Assembly against one end of the roof panel assembly so the peaks meet and the ends
of the roof supports are flush with the ends of the roof panels. Attach with 8 (S11) #8 x 2" Wood Screws. (fig.
26.3)
D: Attach the second Roof Support Assembly on the opposite side, peaks to meet and ends are flush with 8
(S11) #8 x 2" Wood Screws. (fig. 26.3)
Fig. 26.3
Roof Support
Assembly
Flush
262
Flush
Roof Support
Assembly
16 x
S11
S11
Hardware
#8 x 2" Wood Screw
S11
62
Flush
Flush