Advertisement
Step 20: Swing Beam Assembly
Part 2
E: On the Fort End of (201) Engineered SW Beam attach 2 Heavy Flat Brackets with 2 (G21) 5/16 x 3-3/4"
Hex Bolts (with 2 flat washers and 1 lock nut). (fig. 20.6 and 20.7)
F: Place (202) SW Mount in between both Heavy Flat Brackets and place 1 Heavy L-Bracket against (201)
Engineered SW Beam and (202) SW Mount. Attach with 1 (G17) 3/8 x 6" Hex Bolt (with 2 flat washers, plastic
formed washer and lock nut). (fig. 20.8)
G: Attach (202) SW Mount to Heavy Flat Brackets with 2 (G21) 5/16 x 3-3/4" Hex Bolts (with 2 flat washers
and 1 lock nut). (fig. 20.9)
G21
Fig. 20.7
5/16" Flat
Washer
Heavy
Flat
Bracket
5/16" Flat
Washer
5/16"
Lock Nut
3/8" Flat
Washer
Plastic
Formed
Washer
201
Fig. 20.8
Wood Parts
1 x
SW Mount 3 x 3 x 16"
202
201
202
3/8"
Lock Nut
3/8" Flat
G17
Washer
4 x
1 x
Fort End
G21
Heavy
L-Bracket
Hardware
5/16 x 3-3/4" Hex Bolt
G21
(5/16" flat washer x 2, 5/16" lock nut)
3/8 x 6" Hex Bolt
G17
(3/8" flat washer x 2, plastic formed washer & 3/8" lock nut)
53
Fig. 20.6
201
202
5/16" Flat
Washer
5/16" Flat
Washer
Heavy Flat
Bracket
5/16"
Lock Nut
Fig. 20.9
Other Parts
2 x Heavy Flat Bracket
1 x Heavy L-Bracket
Advertisement
