KidKraft Cedar Summit F25745E Installation And Operating Instructions Manual page 68

Step 31: Attach Transom Assembly
Part 1
A: Place 1 Transom Assembly on both (082) Front Wall Panel and (083) Back Wall Panel so they are tight
to (281) Swing Top and (291) Wall Supports. From the outside attach each Transom Assembly to (291) Wall
Supports with 2 (S3) #8 x 2-1/2" Wood Screws per assembly. (fig. 31.1)
B: From the inside attach (291) Wall Supports to each Transom Assembly and both (082) Front Wall Panel and
(083) Back Wall Panel with 4 (S3) #8 x 2-1/2" Wood Screws per support. (fig. 31.2)
C: From the inside attach each (275) Wall Tie to both (082) Front Wall Panel and (083) Back Wall Panel with 2
(S11) #8 x 2" Wood Screws per board. (fig. 31.2)
Fig. 31.1
Transom
Assembly
083
291
281
S3
x 2 per Transom
Assembly
082
12 x
4 x
Fig. 31.2
Inside View
291
S3
x 4 per
wall
support
Hardware
#8 x 2-1/2" Wood Screw
S3
#8 x 2" Wood Screw
S11
68
275
Transom
Assembly
S11
082