Advertisement
Step 77: Attach Elbow Assemblies and TNR4 Slide
A: Place 1 TNR4 Post Mount Clamp on either side of the Clamp Ring so that the bent tops clip in behind the
Clamp Ring. (fig. 77.2)
B: Insert the TNR4 Post Mount Base in between the 2 Post Mount Clamps and screw all pieces together using
1 ¼ x 14.5mm Pan Head Bolt and Square Nylock Nut. (fig. 77.2)
C: Attach TNR4 Post Mount Base to (311) TNR Upright, pre-drill with a 1/8" drill bit then attach with 2 (S6) #12 x
1" Pan Screws. (fig. 77.2)
D: Attach the Post Mount Clamp to the clamp ring using 1 (S37) #7 x 5/8" Pan Screw. (fig. 77.2)
E: Attach (762) TNR Ground Brace to (062) Narrow Wall D using with 2 (S11) #8 x 2" Wood Screws and 1 (S4)
#8 x 3" Wood Screw. (fig. 77.3)
Fig. 77.1
Fig. 77.2
¼ x 14.5mm
Pan Head Bolt
TNR4 Post
Mount Base
S6
Fig. 77.3
S11
Hardware
2 x
#12 x 1" Pan Screw
S6
1 x
#8 x 3" Wood Screw
S4
2 x
#8 x 2" Wood Screw
S11
1 x
#7 x 5/8" Pan Screw
S37
131
TNR4 Post
Mount Clamp
S37
100
S4
762
Other Parts
2 x TNR4 Post Mount Clamp
1 x TNR 4 Post Mount Base
1 x 1/4 x 14.5 mm Pan Head Bolt
1 x Square Lock Nut
Square
Lock
Nut
761
Advertisement
