KidKraft Cedar Summit F25745E Installation And Operating Instructions Manual page 105

Step 58: Install Top Barriers
Part 1
It is important to note hole orientations when installing Top Barriers.
A: Place (581) Barrier Top C across the top front of (057) Narrow Wall A and (063) Rock Wall A making sure that it's
flush at the top and that the pre-drilled holes in the board are towards the bottom. Attach on each end using 1 (H12)
¼ x 3" Hex Bolt (with flat washer and t-nut) per side. (Fig. 58.1)
Fig. 58.1
Wood Parts
1 x Barrier Top C 15/16 x 3 x 35-1/4"
581
1/4" Flat
Washer
1/4" Lock
Washer
H12
1/4" Lock
Washer
1/4" Flat
Washer
057
063
2 x
581
1/4" T-Nut
Hardware
1/4 x 3" Hex Bolt
H12
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
105